Activated carbon absorber
|Payment Type:||L/C,T/T,Paypal,Western Union|
|Terms of Trade:||FOB,CIF|
|Min. Order:||1 Set/Sets|
|Delivery Time:||5 Days|
|Place of Origin:||China|
I. introduction of Activated carbon absorber:
Activated Carbon is often used for gas adsorption, separation and purification, solvent recovery, decolorization of sugar solution, grease, glycerin, medicine, deodorant in drinking water or refrigerator, filter agent in gas mask, and can also be used as catalyst or metal salt cutoff.
Activated carbon absorber is also known as activated carbon adsorption tower, activated carbon adsorption device, activated carbon waste gas treatment equipment, Activated Carbon Filter, activated carbon equipment. Activated carbon absorber is often used for: various organic waste gas treatment, especially paint waste gas treatment, ink waste gas, solder waste gas, plastic waste gas treatment should be most widely used.
Ii. Operating principle of activated carbon adsorber:
The organic waste gas is powered by the fan, and the positive or negative pressure enters the activated carbon absorber. The waste gas is in contact with the porous activated carbon with a large surface. The pollutants in the waste gas are absorbed, which is separated from the gas mixture and plays a purifying role.
Iii. Structure of activated carbon adsorption equipment:
Features of QL series activated carbon absorber equipment:
Yes. The activated carbon adsorption unit is installed in the equipment box with separate drawer type, which can be easily taken out from the inspection door on both sides.
Convenient opening and tight sealing of inspection door. You can open them separately and remove them separately.
The base frame is made of channel steel. Strong base frame ensures equipment installation and transportation requirements.
Yes. The inlet (outlet) air port is a flange interface that can connect the air duct. Size, position and direction can be arranged according to actual requirements. Set the top or side of the box.
The organic waste gas containing dust must pass the pretreatment equipment before entering the activated carbon adsorber to purify the standard emission.
Activated carbon adsorption equipment can select different materials according to different exhaust properties: the main body can be stainless steel, carbon steel, galvanized board, PP board, etc.
Iv. Description of activated carbon adsorption tower:
Activated carbon is a black powder, granular or pellet shape amorphous with porous carbon. The main ingredient is carbon and contains a small amount of oxygen, hydrogen, sulfur, nitrogen and chlorine. It also has a fine structure like graphite, with smaller grains and irregular layers. Has a larger surface area (500 ~ 1000 ㎡ / g). It has a strong adsorption capacity to adsorb gas, liquid or colloidal solids on its surface. The adsorption of gas and liquid can be close to the quality of activated carbon itself.
Activated carbon adsorption is selective, non - polar material than polar material adsorption. In the same series of materials, the higher the boiling point of the material is easier to be adsorbed, the higher the pressure, the lower the temperature, the higher the concentration, the larger the adsorption amount, conversely, decompression, heating favorable gas desorption.
When organic exhaust gas powered by fan, positive pressure or negative pressure into the activated carbon adsorption tower tower body, there is not due to the solid surface activated carbon balance and unsaturated molecular attraction or chemistry health, thus when the solid surface contact with the gas, can attract a gas molecule, and keep the solid surface to make it strong, pollutants and odor adsorption, exhaust gas after activated carbon adsorption tower, into the equipment dust exhausting system, purge gas high standards.
V. application range of activated carbon adsorption tower:
Activated carbon adsorption tower is mainly used for the purification of all kinds of organic waste gas, especially for the treatment of paint waste gas, ink waste gas, solder waste gas, plastic waste gas treatment should be the most extensive.
Shenzhen city Xicheng Plastic Co., Ltd. Located in Bao an District, Shenzhen, The company mainly produces waste gas treatment equipment, ventilation equipment, exhaust tower, Activated carbon tower, washing tower, PP board, PP pipe, PP wind valve, PP elbow, and other ventilation accessories. Our company can be customized according to the drawings or requirements of the processing. Product quality assurance, price concessions.
- Company Name: Shenzhen Xicheng Plastic Co., Ltd.
- Representative: Huang dong yue
- Product/Service: Environmental Protection Equipment , Exhaust Gas Treatment Equipment , Ventilation Equipment , PP Pipeline , PP Valve , Cyclone Tower
- Capital (Million US $): 500000
- Year Established: 2010
- Total Annual Sales Volume (Million US $): US$2.5 Million - US$5 Million
- Export Percentage: 31% - 40%
- Total Annual Purchase Volume (Million US $): US$1 Million - US$2.5 Million
- No. of Production Lines: 20
- No. of R&D Staff: 5 -10 People
- No. of QC Staff: 5 -10 People
- OEM Services Provided: yes
- Factory Size (Sq.meters): 3,000-5,000 square meters
- Factory Location: Baoan Dist., Shenzhen, Guangdong, China
- Contact Person: Mr. Darrick
- Tel: 86--18002556980
Premium Related Products